Changing signal patterns
The unit cycles through coupling modes, polarities and frequency ranges when no water-specific setting is available.
← PRODUCT OVERVIEW
PHYSICAL WATER TREATMENT · COMMERCIAL BUILDINGS
WEHA W100
For residential complexes, smaller hotels and commercial water systems—installed outside existing pipework without chemical additives.
PIPE DIAMETERup to 50 mm1.5 inches
FLOW CAPACITYup to 4 m³/happrox. 8 residential units
FREQUENCY RANGE0–99 kHzcontinuously adjustable
ORIGINAL WEHA PRODUCT
W100 model · Made in Germany
01No additives
No salt or chemical dosing.
02Retrofittable
External installation on existing pipes.
03Higher flow rates
For larger building systems.
04Configurable
Programmes and frequencies matched to the water.
THE W100 MODEL
More capacity for larger buildings.
The W100 extends the WEHA range beyond the typical detached home. Applications include residential complexes, smaller hotels, guest houses and commercial buildings.
The control unit and coils are fitted to the outside of the existing supply pipe. Water does not pass through the device and the pipe does not need to be opened.
Project selection and manufacturing
Suitability is assessed from pipe diameter and material, flow rate, water characteristics and system design. WEHA products are manufactured in a facility operating in accordance with the quality principles of the ISO 9000 family.
DUAL-FIELD TECHNOLOGY
Inductive and capacitive.
Independently selectable.
The W100 couples electrical pulses into the pipe using inductive and capacitive methods. Pulse voltage is 12 V inductive and 48 V capacitive; the frequency range is 0–99 kHz.
- Different pipe materialsSuitable for external installation on existing pipework.
- Sensor-based flow detectionPipe-temperature changes are used to identify water use.
- Control during absenceFlow detection supports shutdown during extended periods without use.
- Two operating approachesAutomatic operation or eight preset programmes.
Parameters for known water conditions
Defined settings support application-specific configuration; frequencies can also be programmed.
TECHNICAL DATA
W100 at a glance.
Data for the model shown.
- Power consumption
- 8 VA
- Control unit
- 155 × 225 × 255 mm
- Weight
- 1.5 kg
- Frequency range
- 0–99 kHz, upper and lower limits continuously adjustable
- Pulse voltage
- 12 V inductive / 48 V capacitive
- Pipe diameter
- up to 50 mm (1.5″)
- Flow capacity
- up to 4 m³/h
- Operating modes
- automatic or 8 programmes
BUILDING APPLICATIONS
For central water systems.
The W100 is installed on the central pipe and configured for the building and its operating conditions.
TECHNICAL DOCUMENTS
Available on request.
Detailed technical, installation and operating information is supplied to interested parties and customers for the relevant project.
IS W100 SUITABLE FOR YOUR BUILDING?
Let us review the system data.
Send the pipe material and diameter, maximum flow rate, number of users, installation photographs and—if available—a water analysis.